1985 Honda CBX "correct spark plug gap measurement" Questions

...spark plug (new) using a hacksaw blade as a feeler gauge (don't have a set of feelers and to be frank don't know the correct gap either.) The bike starts and sounds good but takes a while and several ...

...correct. (more helpful when making sure all 4 or 6 plugs are offering the same spark) 2. as for the spark-plug designs,. the shorter the Ceramic end the hotter the plug gets. so sometimes you can ...

spark plug ends. Do so by removing the wires 1at a time and using an insulated tool hold it against or very close to a good ground and check for spark. If spark is good ensure you are getting fuel. If

spark 2 - Adequate compression 3 - Proper fuel/air mixture .... this is provided all internal parts are in proper working order.. put the correct main jet and pilot jet back in to start, and then take

spark but no fuel you should get a few power strokes this way i.e. the engine will start even if only momentarily. Do not over spray or keep spraying with the throttle held open so as not to overspeed

...spark, not a reddish-purple. if its reddish purple you got either a bad coil or the pulse generators are going bad. Now i"ll assume that you didnt replace the plug wires and hopefully didnt get them ...

correct: Spark Plug Cable Specifications: SPECIFICATION FRONT REAR Length in. (except FXS) 18.75-19.50 6.50-6.75 Length mm (except FXS) 476.3-495.3 165.1-171.5 Resistance-ohms (except FXS) 4688-13,007