Question about Harley Davidson FLHTCUI Electra Glide Ultra Classic Motorcycles
...replace fork lock The fork lock is part of the ignition switch assembly. You have to remove the swich (tricky little button under the switch with the switch in accessory position I think) after which ...
Question about Harley Davidson FLHTCUI Electra Glide Ultra Classic Motorcycles
replace them. THEN install the spacer over the threaded post of the ignition switch housing until it contacts the switch position plate and arrange/locate the spacer so that the widest side is forward
Question about Harley Davidson FLHTCUI Electra Glide Ultra Classic Motorcycles
FORK LOCK? Look under the switch knob for a small square pin sticking down. You need to push this pin up while turning the key to the left, and pushing this pin in will allow the lock cylinder to turn
Question about Harley Davidson FLHTCUI Electra Glide Ultra Classic Motorcycles
...FORK LOCK for a 2005 FLHT/C/U or FLTR (Domestic): Tools needed for removing ignition switch A T27 Torx, a small flat blade screwdriver, 7/8 wrench. 1. Remove the outer fairing and windshield 2. To ...
Question about Harley Davidson FLHTCUI Electra Glide Ultra Classic Motorcycles
replace damaged front fork lock on a 1996 harley davidson FXDS-CONV. Ok, this is how you replace the lock on the front end. 1.Loosen upper triple tree clamp pinch bolts. Remove upper triple clamp and ...
Question about Harley Davidson FLHTCUI Electra Glide Ultra Classic Motorcycles
...replace the fork lock cylinder and I have the and the lock works. I have removed the set screw and cylinder will only move out a little bit. Do I force it out I've tried turning forks and turning key ...
Question about Harley Davidson FLHTCUI Electra Glide Ultra Classic Motorcycles
...Fork. Replace Spring into Fork. Replace Philips Oil Drain Screw into base of fork (Dont forget Rubber washer). Now: For a GT550 (I am told also KZ550 but can confirm) you need 300ml of 15 weight Fork ...
Question about Harley Davidson FLHTCUI Electra Glide Ultra Classic Motorcycles
how do you split the forks to replace seals look for the allen screw on either end of the fork, that is the mail lock that holds the fork together, once loose you can pull the damper out of the coil
Question about Harley Davidson FLHTCUI Electra Glide Ultra Classic Motorcycles
...to fit my new Hyperpro springs and replace the fork oil. Do I need to take the forks out to drain? Can I syphon the oil out without ending up with an air lock? The bike is an APIRILIA 125 '01
193 questions posted
Usually answered in minutes!
681 Questions
291 Questions
199 Questions
187 Questions
165 Questions