...shifter while the bike was off and parked in neutral. Does the tranny in fact need to be tore apart, or can it possibly be fixed on the top side or drum side of the trans? Hi and welcome to fixya, ...
Question about Motorcycles
shifter prawls I can run the bike threw the gears so I know it's working. The bike only has 2,000 miles and I put my clutch basket and everything back on and adjusted it correctly but when the bike is
...bike fell over and the shifter lever broke, did not want to replace so I jury riged the shifter to the remaining shaft. Seems to work fine but can't get the bike to kick into gear. I adjusted the ...
Question about Motorcycles
though two links shorter. And the main crank bearing is starting to make noise, so it probably needs grease. And adjusting. Neither problem is very rare for a year-round urban bike that lives outside
...bike and the shifter pedal shaft arm. To adjust the length of this shifter rod you will either loosen the lock nut and remove the bolt/threaded shaft on one end of the shifter rod and then loosen the ...
...bike the shifter position is adjustable. Take the bolt out and pull the shifiter off the splines. Mark it before you do. Change the angle up or down one spline and try it. If it's a Big Twin, ...
Question about BMW R 1150 GS Motorcycles
...shifter goes into the case theirs a bearing and a seal if the shft has been bent it may have to be straightened or replaced. The clutch and it's cable are also likly. the clutch cable neds to work ...
...shaft...OR..if this bike has a shifter adjustment it might need adjusting..Not sure as most new bikes do not have this feature.. 3. The shift arm(the one that moves the shift fork cam) might be
16 questions posted
Usually answered in minutes!
21 Questions
17 Questions
7 Questions
10 Questions
