Question about Harley Davidson FLSTS Heritage Springer Motorcycles
work except throttle. Brakes rear or frount cant stop it when it happens. Checked teh neck bearings seem to be OK it flops to the left (standing in frount of the bike) with no bind or Been to three HD
Question about Harley Davidson FLSTS Heritage Springer Motorcycles
...wheel. Will this work? and where can I find a 9 inch shock or should I try and use a reducing bracket and keep stock shock. I haven't been able to find one? hi i would advise you to keep the shok ...
Question about Harley Davidson FLSTS Heritage Springer Motorcycles
...pulley, it too will be useless as the belt was narrower. You may can change the front pulley to match it but that's a LOT of work. Why don't you try to find a rear wheel off of a '90's model
...wheel sitting on the ground, start raising the bike more. As you come up with it, work the drive belt off of the pulley. You may have to remove the lower belt guard to do this. Do not twist the belt ...
Question about Harley Davidson FLSTS Heritage Springer Motorcycles
work too. With the wheel just off the ground or still touching, loosen and remove the large axel bolt. Before you start you'll need to be sure that you have a wreanch big enough to do this as some
...had to change my front sprocket to a 420 to use the rear TT225 rear wheel. So it will work but you have to make some small mods, new chain 79 bucks and front sprocket min 15 tooth imo.
Question about Harley Davidson FLSTS Heritage Springer Motorcycles
...work with from the rear of the bike. Loosen the lock nuts and turn the adjustment bolts clockwise. this will draw the rear axle (wheel) backwards - tightening the chain. Take care to turn each side ...
Question about Harley Davidson FLSTS Heritage Springer Motorcycles
...wheel may drag the underside of the rear fender. You may can lower the front of the bike by loosening the triple tree clamps and allowing the upper tubes of the front forks to slide upwards about an ...
Work your way around gently tapping and keep the seal even. Don't force. Re-assemble and use lock tite on the internal nut. Don't want wheel coming off mid air. Thank you for contacting FixYa.
Question about Harley Davidson FLSTS Heritage Springer Motorcycles
...bike at least 12 inches off the floor. Once you havef drained the tube by removing the small screw in the trailing side of the slider and worked the fork oil out, taken the front wheel off, the front ...
36 questions posted
Usually answered in minutes!
35 Questions
20 Questions
14 Questions