2000 Harley Davidson FLHTCUI Electra Glide Ultra Classic "tri rear brake" Questions

...rear brake is locking up. The master cylinder has been rebuilt the lines have been flushed and the rod and cup have been replaced , but the rear brake keeps locking up . the Harley shop has been ...

...rear brake the left turn signal comes then if i turn left turn signal on all brake lights all blink gday there it sounds like you have a dirty earth wire somewhere just clean all of the connecters ...

torque specs What is the torque for the clutch drum nut and how to lock the clutch drum from turning without a locking tool? Not sure on a TwinCam, but the Evos were 60 ft/lbs, LEFT HAND THREAD! ...

...rear brake caliper about a half turn. Press the rear brake slowly until it stops and hold it there. Tighten the rear brake bleeder valve while holding the rear brake pedal down. Then, release the ...

...rear brake pedal operates the rear caliper and the front disc. When you tried to bleed the left front caliper you let air into the rear brake system. Bleed the rear brake and front left caliper using ...

rear brake pedal, a scrapping noise can be heard, but when the wheel is removed, there is no visible signs of damaged metal. They are new shoes about 1500 miles on them. Also, I have to really tighten

Rear brake light will not come on when rear brake is applied I have a 1984 750 Honda Shadow. The front brake when applied will allow for the rear tail light to come on but not the foot brake. I am ...

rear brake fails then works again on my xjr400 the rear brake stops working then gradually works again. This always happens after riding for a while could have air in the lines might try bleeding the ...

...rear brake resevoir. Fill it with Dot 4 brake fluid and proceed to bleed the brakes, If this does not resore your braking and there is no sign of a leak on the rear caliper, you will have to replace ...

...rear brake also had lots of free play in it. In trying to tighten the nut it appeared to be tight already. What should I do? the back brake leaver on the rear drum is fitted to a "spline" it may have ...