1979 Harley Davidson XLH 1000 Sportster "remove ignition switch" Questions

Ad

Question about Harley Davidson XLH 1000 Sportster Motorcycles

1 Answer

...Ignition Coil Primary Circuit Test Remove the coil. THEN set your ohmmeter scale to RX1 and place ohmmeter leads on the primary coil windings A (front of coil) to B (middle of coil), B to C (front of ...

Ad

Question about Harley Davidson XLH 1000 Sportster Motorcycles

1 Answer

...remove all wires from the small terminals on the ends. Use a digital volt ohm meter and put the function switch in OHMS, R X 1. Touch one meter lead to each of the small terminals. Your meter should ...

Ad

Question about Harley Davidson XLH 1000 Sportster Motorcycles

1 Answer

...remove seat and find each wire going to the rear section of the bike. it should be a plug in type connector, I believe its a 5 wire connector. 3.unplugg this connection and test the side coming from ...

Question about Harley Davidson XLH 1000 Sportster Motorcycles

1 Answer

ignition switch on and press the start button. If you show voltage, the starter relay is good. If not, replace the starter relay. If you show battery voltage, the large contacts inside the solenoid of

Question about Harley Davidson XLH 1000 Sportster Motorcycles

3 Answers

...remove the green corrosion build up. Do not use emery cloth! The glue on the paper will come off on your contact plate. Check the contact shoulder's as well. I've had to shim them up at times. Hope ...

Question about Yamaha Motorcycles

1 Answer

remove ignition switch switch on 2013 Yamaha Royal Star To remove the ignition switch on a 2013 Yamaha Royal Star, you can follow these general steps: 1. Disconnect the Battery: Begin by disconnecting

Question about Harley Davidson XLH 1000 Sportster Motorcycles

1 Answer

...remove ignition switch on 2001 electra-glide Here is something a friend sent to me. I've never taken one of these switches out so I can't say for sure if this is correct but it's all I ...

Question about Harley Davidson XLH 1000 Sportster Motorcycles

2 Answers

...remove the IGNITION /LIGHT KEY SWITCH AND FORK LOCK for a 2005 FLHT/C/U or FLTR (Domestic): Tools needed for removing ignition switch A T27 Torx, a small flat blade screwdriver, 7/8 wrench. 1. Remove ...

Question about Harley Davidson XLH 1000 Sportster Motorcycles

1 Answer

...remove the IGNITION /LIGHT KEY SWITCH AND FORK LOCK for a 2005 FLHT/C/U or FLTR (Domestic): Tools needed for removing ignition switch A T27 Torx, a small flat blade screwdriver, 7/8 wrench. 1. Remove ...

Question about Harley Davidson XLH 1000 Sportster Motorcycles

1 Answer

...remove the IGNITION /LIGHT KEY SWITCH AND FORK LOCK for a 2005 FLHT/C/U or FLTR (Domestic): Tools needed for removing ignition switch A T27 Torx, a small flat blade screwdriver, 7/8 wrench. 1. Remove ...

Not finding what you are looking for?
1979 Harley Davidson XLH 1000 Sportster Logo

382 questions posted

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...