NEC Dterm DTP 32D-1 Corded Phone "extension swap phone" Questions

...extension 101. There is no "swap" command and we usually move the hardware at the frame rather than in software, but you can do it if you find a vacant number. An example would be to swap 102 and 108 ...

...swap the entire phone with another phone will I lose the preprogramed numbers? The Display can be swapped.... if you can find one. Otherwise no programming is retained in the telephone. Swapping ...

...phone to another desk and want to keep the same extension. Example: his original extension is 101 now that I moved him it is now 103?? The easiest way to do this is move the cross connect in the ...

change internal directory on optipoint 500 change display name of extension The extension name and extension number are set in the system programming. Use manager 'e' and change them in the station ...

ON - Feature 84 then From the phone being moved, press Speaker 61 Enter the swap extension Enter password when prompted (probably 10 zeros) Confirmation should appear on LED and you should hear a beep

...extension was a swap of the old M7310 with a new(ish) M7310 no additional programming should be necessary. However if the phone was replaced with another type of nortel set(M7208, M7324,T7313 etc.) ...

...extension from 109 to 111 using the kx-t7730 With any luck, you have a TA series, or at least an non TD/1232/TDA100 system that the phone is plugged into. The quickest way is somewhere in the back ...

phone into an extension with the same type of phone and see if the same thing happens, if it does, the phone is bad. I recently had a phone doing the same thing, replaced it and the extension was fine

...swap phones It probably is the phone extension line (from the wall) to the phone. Again you need to test phones using a known working phone cord. When you rule out the circuit and line cord then you ...

...extension 10. I need to change the line in my office to be 10 and default to zero. You can swap extensions 10 and 11 back at the phone cabinet. Remove the front cover(if there is one), depending on ...