NEC Electra Elite 32D-1 Corded Phone "flashing extension button phone" Questions

...phone is by flashing the hookswitch (FLASH) button and dialing the 2 digit extension. 3. Transfer into voice mail is done by programming a button or pressing FEATURE 14 and the 2 digit extension. ...

...flashing, and when you look at that extension from all of the other phones, it is flashing as if someone is holding on that line. I have tried unplugging the phone, pushing different feature options, ...

...button with another phone's extension number pre-programed into it. Transferring a call you're on is done by pressing the TRANSFER button, followed by dialing another phone's extension number or ...

...not see a telephone connected to that extension. Check the extension that you are calling to see if it is operational. Check the extension number by using Feature *0 and pressing the intercom

...flashing furiously and I cannot figure out how to make it stop...any suggestions? I'm guessing it's only on extension 10 or 11 :-) It is telling you that the system is in NIGHT mode. Try pressing ...

...button to be programmed, and enter an extension number. You will have to do this for each button. Alternatively, you can unplug the phone for 1 minute, and plug it back in. The lights will start to ...

...extension. (If a line is not assigned to a button, the green light next to the button is off.) The following ringing options can be shown by the green light next to the line button. Immediate Ring - ...

...flashing. the display should show OK on the display screen of the extension phone; press OK. If you have more than one extension to add: after you press 00; the symbol for # # # will come up. Enter a ...

...extension. (If a line is not assigned to a button, the green light next to the button is off.) The following ringing options can be shown by the green light next to the line button. Immediate Ring - ...

...Button (programmed for an extension) constantly flashes red and no-one is using the phone (extension), what does this mean and how can I rectify it? It probably means the phone is in Do Not Disturb. ...