...ignition coil?if you think that these are all good,then you must replace the CDI.You cant test a CDI if this is good or not because it is a form of IC or integrated circuit,unless you have a ...
...CDI module. Then, the electric current flows to the charging circuit, charging a capacitor. A rectifier inside the charging circuit prevents the capacitor from discharging before the ignition point. ...
Question about Yamaha Motorcycles
...ignition circuit check for safety micro switches not working right up to the CDI power to the CDI but no spark --replace cdi power from the cdi nut still no spark --replace the coil AS to not ...
...CDI unit. The ignition switch is usually located on the right side of the handlebar and has three wires connected to it: a red wire, a black wire, and a white wire. The red wire from the ignition ...
Question about Honda Motorcycles
cdi box( capacitor discharge ignition) is what gives you the current that energizes the coil for the plugs by pass it and there is little chance of it starting best replace it with a new item and then
Question about Cagiva Canyon 500 Motorcycles
...ignition switch, or engine kill switch, the only way to test the cdi is to replace it, some circuit tests on the unit may be possible, but only a new unit will eliminate the fault check for power to ...
...IGNITION SWITCH. 2 IF THERE IS POWER THEN SUSPECT THE PICK-UP (PULSAR) COILS & WIRING FROM THERE TO THE CDI - & LASTLY BY A PROCESS OF ELIMINATION SUSPECT THE CDI (ITS GENERALLY IMPOSSIBLE TO ...
...voltage regulator so that the CDi won't overheat. Check also the ignition coil, it might have a short circuit it the connection terminal or the polarity is wrongly placed. Thanks for using
Question about Power Motorcycles
...cdi from ignition. Wires at cdi don't match any colour leaving the ignition and was hoping not to have to strip it all apart. Please can someone help with the ignition off ,use a multimeter set on ...
11 questions posted
Usually answered in minutes!
9 Questions
3 Questions
2 Questions
