Honda Pressure Washer PSI 3000 "power quits running" Questions

...quits? Carburetor could be dirty or float stuck. Try putting dose of carburetor cleaner through engine and cycle choke lever and engine speed lever back and forth while engine is running after it has ...

...power washer and it will start but then quits immediately. Do I have to hook the water up before it remains running? I have had a mechanic check everything else and he says there is nothing wrong. ...

...power washer with 160 was running then quit, will start but only run for 5 to 10sec. Check the Oil Level. Some engines have a shut off if the oil is low. If that is not it the carburetor may need ...

DeWalt 3800 Pressure Washer Runs 20 min then quits. Runs great for 20 mins, then power loss. After "cool down" machine okay. I have the same problem and even have the issue with gas cap off.

power washer wont run changed oil, changed gas, poured gas into carburetor ,, will run shot time then quit,,guessing fuel line plugged but don't know how to unplug,, help... What make and model? ...

...pressrized.I suspect household water pressure is too low.It worked for a moment but then quit. Power Washer Nozzle is dirty, clean out with a small diameter

Power washer quits running once I take it off choke gassed related? Sounds like the main jet is clogged, clean the carburetor and try again.

...running. I let it cool down, turn on power, it buzzs then stops. Is the motor burned out or thermal reset needs to cool down more? Motor seized up! You can try turning it manually. If it moves freely ...

...running.Has current going to it. Can't find a reset switch mentioned in the manual. Water passes through the machine fine. No motor sounds. the motor on these power washers is a split phase type with ...

...hose, spigot opened all the way, etc. If the problem is air pockets, make sure you're running the feed hose long enough to get a good flow of water before hooking up to and starting the power