Makita 10" Dual Bevel Sliding Compound Miter Saw "miter saw turning" Questions

miter saw My 10" compound miter saw seems to have a bad switch, The blade turns manually, but when I depress the switch nothing happens. Just before the problem, I had released the switch after a

...miter saw is here. Owner's manual is here. If these aren't quite what you need, you can view other models of Makita miter saws, here. One thing to bear in mind. There's a miter angle lock and a slide ...

...miter saw OK first raise the cutting head. Loosen the screw that holds the guard in place and move out of the way. Find the spindle lock on the right hand side of the gearcase and turn blade by hand ...

...miter saw I bought a new blade, but never owned this older model saw, blade doesn't seem to fit and I can't find the blade lock. Have you removed the old blade yet? The blade lock my be broken off -- ...

miter toward the back of the saw, and rotate the blade by hand so that your piece of wood hits the same spot as where you checked in the front. You can see a large misalignment by eye. But you can get

...saw blade is 1/16" out of parallel with the miter groove in the table. How do I adjust the blade/motor? Thanks To be that far out of alignment, there must be something loose. Unplug it, turn it over ...

...miter saw it should have lock button some wear on it push it in. this will keep the blade from move. so you and take the blot off The bolt that holds the blade has left hand threads. You have to turn ...

Miter slots on table are not parallel to blade Either the saw is a cheapo and you can't do anything about it. If it is a better quality saw it should have at least four bolts or lugs where it it ...

...miter saw the rigid 10 inch ms1065lza All of a sudden the blade just keeps turning after I release the trigger The brake on electric motor driven tools is the field & armature.  When running ...

...MITER SAW 36-075, IT IS NOT A STAND BUT THE ARM ITSELF? Here is a link to an exploded parts diagram and instruction manual for that saw.Normally, all that is required is that you unscrew the handle ...