Maxtor Hard Drive "hd jumper settings" Questions

...HD jumper setting (Master, Slave or Cable Select). Then look again the rear side of the HD and u will see some pin that locate beside the power input of the HD, that is the jumper pin. Now set the ...

...Jumper Settings I have a Maxtor 31536H2 Hard Drive 20GB, and I am trying to add another HD so I have more HD space on my computer. The S/N N20987 manufactured in 05JUL2000, and I am trying to use it ...

...HD and it does not give jumper combo to set it up as a slave. All it showes is that Jumper: J50, Master/Single: on, Slave: off. The jumpers are there, I just don't know how to make it the Slave HD. ...

HD's, the jumper setting for 'Master' on all styles would be the last VERTICAL pin setting on the LEFT. I'm sure if you have another type (Seagate,etc.) they will have setting's on their web-site. Don

...HD Where are the jumper pins and what are the slave settings. Only jumper I found has ..CS..DS..and SP. Right now the jumper is on the DS pins. Thanks! Nick CS = Cable Select DS = Master SP = Spare ...

Jumper Settings Will this HD run on cable secect? and which jumpers to use? charlie If you leave it at cable select the cable will set the drive to either master or slave depending on where it is on ...

jumper settings for duel hd set up Hi, Below is an image of a Maxtor 3.5 HD settings as shown on the actual HD. If you are connecting 2 of them in a single IDE flat cable/strip, one must be master and

...jumper on HD..... the jumper setting mostly written on HD If the jumper is in the wrong location, your BIOS and your file-copying software will not be able to "see" the drive at all. The "lock" is ...

what are all the jumper settings for teh 32049H2 what are all the jumper settings for the 32049H2 20.4 GB HD Here is a link to an image of your jumper settings.

...be a label on the hd showing you where to set the jumper for 'slave' mode. make sure it's connected to the same cable as the other hd. 0n the second connector! they have their priorities! good