SC 541 on Ricoh AP410N User is getting SC 541 on this Richol AP410N press "yellow key"->107->Press "Red Key"for 5 sec-> 5#810 -> Press"Text/Photo Key" and "#" at the same time. Reboot machine.
Question about Gestetner Office Equipment & Supplies
...SP 397? any help? error code SP397? 542 an error in temprator .may be termistor dirty or defective.termostat or lamp check all.then reset by :c(yellow)-107-c(red.press 3 second)-then turn off and ...
...this steps press yellow cancel and 107 and hold on red cancel 5 seconds and press1 copy and 4 # 810 and press 1 simultaneously with photo press yo will see reset accepted and close machine and ...
...in ricoh 1400 press yellow cancel and 107 and hold on 5 sconds on red cancel and yo will see 1 go to 4 and select 810 and press 1 simultanously with photo press you will see reset accepted or ...
Question about Gestetner Office Equipment & Supplies
...C811DN? Go into SP mode. Saw it there once when I was just fooling around in SP modes at work. Enter SP mode with pressing the yellow clear all button, then 107 and holding down the red stop button.
Question about Ricoh Office Equipment & Supplies
Yellow key-107-red key,enter in the SP mode open the front door,turn off the copier,unplugged,wait 10 sec.,pluged on close the front door and turn on the power switch. copydoki has advised incorrectly
...yellow)key-107-clear(red)key,touch SP mode,open the front door and turn OFF the power switch.Unplugged the machine,wait 10 sec.,plugged the cords,close the front door amd turn ON the power switch. ...
yellow key then 107 then red key hold down for 3sec.after that i press 1 on SPmode display then it display 1.feed. then i failed to continue after. so where should i do after that ..... sc541/541 is a
error sc542 RICOH AFICIO SP3510dn 1. Mode(Yellow Button) 2. 107 3. Press STOP Button for 3 second (RED Button) 4. Copy Sp 5. 5810# 6. Excute 7. Power Off 8. Power On
Question about Ricoh Office Equipment & Supplies
...Yellow cancel 107 Hold down red cancel Select system/copy sp On keypad type in 7807# Tap execute On the screen Switch machine of and on again Machine should be good to use, unless you have a actual ...
65 questions posted
Usually answered in minutes!
33 Questions
21 Questions
25 Questions
22 Questions