RCA D52W23 52" HDTV CRT TV "convergence adjustment" Questions

...adjustment location. 3. After Convergence alignments are complete, press the Menu button on the Remote to return to the SELECTION menu. 4. Highlight the STORE selection and press the right cursor key ...

convergence problem while I'm adjusting the convergence on the tv, I can adjust the green and the blue to line up but when trying to adjust the red I only can move it up or down. My question is what ...

...adjustment. Convergence is ok, Hor Drive signal is incorrect. Many do-it-yourselfers mistake the Hor Drive problem in Toshiba RPTV with convergence failure. Too much adjustment of the convergence ...

convergence off I have a phillips 51pw9303/17f and i cannot adjust the convergence it is off and remote wont adjust it? I went to menu and went to convergence and it just wont change it? The ...

...fix it.The set should have in customer menu a limited convergence adjustment with up to nine points where you can adjust---if it will not adjust there in some way----convergence circuit needs

Convergence Alignments.* *8. To Save the Adjustment completed in the last procedure, Exit/Save the Convergence Service Mode by selecting Key 1 on the Remote Transmitter. This forces the corrections to

convergence adjustment screen will not adjust properly. When the tv is turn off the on again it will change position on the convergence adjustment screen Dust will not be a issue with convergence. Not

...Convergence Adjustment 2 menu targets. However, on Convergence Adjustment 1 (white target in the center of the screen) the blue adjusts through about an inch range, although I cannot bring it far ...

convergence adjustment, but don't know how to adjust it. the --ic --has not been fitted properly. refer to this link .................................http://www.eserviceinfo.com/index.php?what=search2

...Convergence appears first by default. 5. Colored cross-hairs show the current adjustment position on the grid. To move the cross-hairs to a different position, use the CH+/- buttons on the remote to ...