i pluged it in and it popped? when i pluged in the welder to start weling it made a popping noise and started smoking, i checked the breaker in the house and the reset button on the welder and it ...
I have a hobart handler 140. wire feeds ,no weld output. we were welding bodywork for a very short time and I heard a slight pop from the welder . now no welding . checked ground, replaced tip ...
wire speed or heat problems my welder wont weld with a steady pop like popcorn popping in a microwave, it spits and sputters and i cant set the wire or the heat to fix the problem so can anyone help ...
...at the level 4 on the dial and the speed on the wire is around 5 or 6 when i try to weld it only pops and i cant set speed to match the heat and i cant set the heat to match the speed to the wire. ...
My welder pops bad when trying to weld and poorly Increase Voltage.
century wire feed welder My 80GL spits, sputters and pops when trying to do any welding, can't run a bead and makes a mess! Any ideas? Sounds like you need to learn to weld or Metal is way rusty or ...
plugged a 110 into 220 volts turned it on heard it pop now it wont work check for an inline/or internal safety fuse could be pop noise if no fuse burnt up circuit board
Experienced a power surge, garage lights dimmed. Wire feeder and fan still operable The circuit breaker may have popped. Wait a while to see if it resets itself. Look for burned fuses too.
why does my mig welder keep popping the fuse? House fuse??. If that's problem... then you need a dedicated line to your machine with a 20 amp minimun fuse, or upgrade the current one to 30amp.
when i go to run a bead the machine pops and then it shuts off It shuts of because the machines over heats, or poor voltage.
146 questions posted
Usually answered in minutes!
26 Questions
20 Questions
13 Questions