Question about Electrical Supplies
My Makita G5500r power generator doesn't have smooth Idle? I bought this generator many years ago. When first started, the low idle was smooth. When power was needed, motor speed increased and ...
Question about Electrical Supplies
generator) will only run smoothly with full choke, what's wrong? I have replaced gaskets, needle valve and cleaned the carb. The generator starts easily at full choke, will run smoothly at full choke;
generator not running smoothly under load My generator rpm's go up and down continuously when there is a constant load. This is not a refrigerator compressor kicking in or anything like that. For ...
...generator My gen was running smooth the previous day no problem. next day it starts, run smooth but no power to the panel. Any Idea. Does changing the sparkplug, oil etc. works? this gen is 6 months ...
Question about Honda Electrical Supplies
runs but not smoothly; if i pull choke out part way it runs smooth; carburetor plugged? check or replace the carburetor diaphragm.
Question about Coleman Electrical Supplies
...generator Full choke to start, open choke partially immediately the engine starts to where the motor runs smoothly, continue opening as soon as you can while keeping the engine running smoothly. Be ...
...generator EF2400iS is not running smooth as I have to pull the choke out a little to smooth it out and it seems to be burning more gas than it was last year. I there an in line gas filter for this ...
...generator engine only runs smooth with choke half on, what can cause this? also the extra jet on the outside of carb what does it do? Not sure about the "extra jet" on te side of the carb without a ...
The MOTOR on my Wen Power Pro model 5500 runs fine, but the GENERATOR does not come on. any ideas? The brushes need to be filed smooth or replaced. 15 minute job, remove 2 bolts on the generator cover
Question about Electrical Supplies
...running smoothly. What adjustment should I make? Motor is not running smoothly even with no load. It is continiously "hunting". Voltage generated going up and down. What to adjust? Hi,I know you are ...
15 questions posted
Usually answered in minutes!
3 Questions