Question about Polaroid Televison & Video
Polaroid does not flash on the screen when it powers up. I have a picture to add to the post. THANKS for any INPUTS, Check the caps on the power supply board, this is the most common problem with this
...Polaroid 323b I have power on half of board no stand by power.can some one help,The R0804-0901 is extremely simple in regards to operation and outputs. Unlike most TV power supplies its only ...
polaroid TDA-03211C that has sound and no video.black screen has no "ghost image" when a flashlight is held near it. The 2 main video capacitors were replaced with no change. Any suggestions
...39; legs. Use a big needle pin and removed these paste. Also the six transformers39; legs. Also the middle part of the board. Next use the toothbrush and alcohol gently brush until look shiny. Let ...
...pin strips then either clears up or gets worse by displaying large blocks of video accross the sceen. Then if I turn it off, it will not start again and the power light is blank. After it cools down ...
186 questions posted
Usually answered in minutes!
157 Questions
83 Questions
45 Questions
51 Questions
49 Questions