Samsung CLP 315 Laser Printer "leds mean" Questions

Hello !! I have a problem whit my Samsung CLP-300n it will not start up when i turn on the power ? It's only ckickling ! If the only thing it does is click and the motors or LED don't come on, means ...

...m assuming means press and hold the two buttons, then press them both again. The combination of the LEDs tells you where the problem is: RED Status +: Toner LED = Fuser (Fixing Unit) Drum LED = Laser ...

All 3 Error lights are flashing (4 if you count the GO button)!! Hi, I'm trying to see what's wrong with my Brother HL-2170w printer. It was working fine yesterday, and now , for some reason, all 4 ...

My Drum light has come on and stays on during my printing. Is the drum going bad? This means your drum unit is coming due for replacement. If your print quality is still good I would just reset the ...

Every time i turn on my Canon Pixma MP190 series Every time i turn on my Canon Pixma MP190 series printer and leave it on for more than a few seconds the alarm LED and the Power button LED will begin ...

The red LED continiously lights cann't print, both LED constantly lights. Green & red LED are constantly lights. I have changed its cartridge. But it cannot print. Sometimes the paper rolled ...

There is a red light flashing The last light on the farthest right of the printer is flashing, and it will not prit anything at all? Use the system monitor to check if you require to replace on of the

ALL LED INDICATORS FLICKERS CONTINOUSLY ON INTIALIZING lols if all led indicator flickers it means hardware failure

My CLP315 WON'T PRINT - IT HAS THE RED LED LIGHT ON. HAVE CHECKED THE PAPER LEVEL, WASTE TONER CARTRIDGE NAD REBOOTED SEVERAL TIME BUT RED LIGHT REMAINS ON The problems you checked are indicated by a ...

all the lights are flashing When the status LED is flashing red, it means there is some minor error(i.e. the front door isn't latched shut, paper is jammed, etc) or the toner is getting low. Double ...