Moen 3175 Legend One Handle Shower Faucet With trol Pressure Balancing Valve.... "changing cartridge pressure" Questions

...pressure our 122-426 b&K kitchen faucet. Changed the cartridge and cleaned the aerator We flushed our hot water tank and after that we have very little pressure our 122-426 b&K kitchen faucet. ...

...cartridge sticktion and turns by itself changing the temp. If you take the center cap off and remove the center screw and then pull handle stright out., you will see a large threaded ring , you have ...

...pressure is OK in other parts of the house and with other fixtures in the same bathroom, check the showerhead screen for sediment, then pull the cartridge out of the valve body (first remove the cap ...

moen kitchen valve is too cold in hot position & not hot enough in any position. I have changed all the seals & my hot water supply is hot. I have not replaced the whole cartridge. My husband ...

...cartridge to sense a false pressure drop. This is forcing the spool to shift, restricting a full hot water temperature from coming out." Believe it or not, I got this information from Moen. Their ...

Put a lever handle on the tub/shower fixture, now temp doesn't I replaced the arcylic handle with a lever handle, by moen, which said it worked counter clock wise, the facet works clock wise, will ...

no hot water Did you change the cartridge? Only use a genuine Moen 1225B cartridge the off brands do not last call Moen they will send you a new one for free there is a separate balancing spool on a ...

...Changing the cartridge did not help. Check out the nozzle screen for clogging. And if that does not do it then the cartridge inside your faucet is not operating properly. And those cartridges can ...

put new moen cartridge in and I have no water at all coming out of the faucet Do you have cold coming out? was this the problem that caused you to change cartridge? Did you use a Moen brand cartridge?

...changing the cartridge. Also remove the seats at the back of the housing and reexamine for bad seals. Sometimes it takes a second install for it to stop. Something isn't seating properly plus, it ...