...remove lint if the inside walls were moisten with water using a manual spray pump. Exercise extreme care and do not wet other parts of the machine. Remove the loose lint and rinse entire area ...
Question about LG WM Washing Machines
...remove all residual water from the wash tub & drain line or you will have about a gallon or so inside your washer and on the floor to clean up. Here?s a helpful way of quickly removing the residual ...
...water but eventually it builds up calcium and deposits that start to bind on the rotating part, which will cause it to draw more current. An overload on the outer part of the motor (coil) will open ...
...remove water from the tub, you can either bail it out or deenergize the solenoid. To accomplish the latter, you can remove the control panel shroud assy, (remove two sheet-metal screws), lay the ...
...from the bottom. start with the water pump (2 metal clips holds it on) then the motor (also has metal clips but larger and may have retaining screws) this will give you full access to the ...
...water) machine. First, see the Sears parts site for your washer: http://www.searspartsdirect.com/partsdirect/getModel!retrieve.pd?modelNumber=110.22702100&pathTaken=partSearch and you'll see a ...
...remove all residual water from the drain lines, tub and drain pump. If you do not own a shop vac, remove the lower panel under the door and locate the drain pump. If the drain pump has a clean out ...
246 questions posted
Usually answered in minutes!
1,845 Questions
401 Questions
243 Questions
245 Questions
234 Questions