LG WM1812C Front Load Washer "loader loose" Questions

My LG washer WM2101 front loader has started leaving the clothes very wet even after high spin SOUNSS LIKE A BAD CLUTCH IF DIRECT DRIVE AND IF BELT DRIVEN I WOULD CHECK FOR A WORN LOOSE BELT

loader washer has an increasing louder spin cycle. LOUD NOISES IN MACHINE; LOT OF THINGS TO CHECK, THE BELT LOOSE OR WORN, THE CLUTCH, THE TRANNY, THE BEARINGS BOTH TUB SEAL AND BEARING, THE REAR DRUM

...loader had a DL signal, how can I correct this door lock error? Thank you! Check for loose wires from the door lock to the control board.If no loose wires, Replace the door lock switch. sometimes the ...

loader washer . The door doesn't close all the way. It locks, but is kind of loose. I don't get any error messages, and it cycles fine(washes fine), but as soon as it starts washing, it starts leaking

...loader When you see a fault code, always think that this may be just the indicator that other faults may be developing. That is why it is so important to call out a qualified Technician to check your ...

...loader) There is a vent at the back of the machine near the top that is covered by a small round white plastic cross pattern. Inside of the machine there is a black flexible hose that attaches to the ...

...loader & I saw a 'UE' msg can you tell me what that is u can email me @ [email protected] Thanks Hi there, Code UE is an unbalanced load error, usually shown when there is a very small load where ...

...loader washing machine has no power in midcycle I heard a loud pop and the machine stopped working and now as no power there is power in the outlet You will need to unplug the washer, remove the 4 ...

...of the drum there is a shock absorber. A visual check should tell you if there is a problem. Front loaders are prone to vibration problems. Don't want to go into the technical details of why, but ...

...sudsing can cause the problem. I use less than the cup calls for due to the effectiveness of front loaders. the machine has been unplugged for the better part of 3 days to no avail. i have tried ...