LG WM1814CW Front Load Washer "located balance wash sensor" Questions

...likely, you have a problem with the balance ball sensor in the back of the unit if it so equipped. It is located in the back of the unit and will require an LG qualified tech to see what's going

...located also in the rear of machine on the part called the stator .the stator is a round device that attaches to the rear of tub and has a copper coil that goes around the entire thing... on this ...

...sensor (located on the motor windings. easy replacement, and part is covered under the 5 or 7 year motor warranty) After those causes, next on the list, could be a stripped out spline on the motor ...

...wash it grinds to a noisey halt then LE flashes. HELP! I'm sorry I only have service info on US market models, but this info might help. LE codes are extensively covered in past Fix-Ya solutions, but ...

balance sensor not the hal sensor. The correct part (if your model number is WM1814CW is 6501KW2001A. It's located behind the rotor on the back side of the stator. I was wondering if anyone knows the

...located. If the flooring is weak or not as solid as concrete you may have a hard time keeping it from shaking. One of the other common things that I see is most people don't put a full load in the ...

...are usually mounted on the shock.Remove the connector and re-crimp the wires so that you know there making a positve connection.Re try in spin ,if the problem remains ,replace off balance ...

...ur suspension springs and the counter weights and damper straps etc Gw712 comes up with an out of balance error code 43, where on this machine is it ?? I can't locate it ?? "Out of balance sensor

...sensor is defective. The first thing to do is checking floor level and putting the machine at balance as explained in the user manual also try distributing the load. If that does not work there are ...

...Balance sensor is located under control board. Remove with care. Check that little button (size of pen top or pencil lead) is moving in & out freely. It is spring loaded. If it sticks, replace it. ...