LG WM-2032H Front Load Washer "washing machine sensing" Questions

...machine is sensing the load of wash. I unplug the machine, rearrange the clothes in the machine and try it again. Usually that does the trick and the machine will work fine for weeks or sometimes it ...

...WASHING MACHINE http://136.166.4.200/contents/Laundry/WM1832/WM1832xx_Service_Manual.pdf seems to have the manual for a like machine. It does look pretty straight forward removal of the motor, but ...

This machine from day one had an imbalance problem. Yes the shipping bolts have been removed. It has got to the point now that we see the machine getting closer and closer to our furnace which is 3 ...

washing machine wont start on any cylcle, After setting the lg intellowasher to a setting and pushing the start button, the washing machine does nothing for about 30 seconds then all the lights start ...

fault code hi we have whirlpool 6th sense wasing machine and the fault code FH is coming up after 5min on a rapid plus wash any ideas? I have look over the codes for your model and dont see an FH code

Washing machine stopped and code said LE what's the problem LE code means that the Rotor Position Sensor has sensed a drag on the motor. It is not to difficult to replace. You will need to remove the ...

Wash cycle not filling with water We had to cut the main water line off for about an hour, then turned it back on. Now my washer isn't filling with water. It senses the load, then moves on to the wash

washing machine WAsing machine will not spin Dear jwarbonnet, ngfam at you service! TRY UNPLUGING IT AND THEN REBOOT IT .IF THIS WORKS THEN YOU ARE SAFE! OTHERWISE This sounds like it will only fixed ...

Washer runs threw all cycles fine, then it will not turn on again for a new load unless you unplug and immediately plug in. good for another load then the same thing ???? check door interlock or ...

...washing machine won't start. Finding correct parts is not so easy. Why? WM2277HW LG Tromm washing machine won't start. An appliance repair man said it was the Main Control Board. He also said ...