LG WM-2032H Front Load Washer "sensing" Questions

This machine from day one had an imbalance problem. Yes the shipping bolts have been removed. It has got to the point now that we see the machine getting closer and closer to our furnace which is 3 ...

Loud gear noise in spin cycle. During spin cycle, there is a loud gear or bearing noise. Looked in the back and there is a rusty stain where a watery substance is leaking out the rear bearing. That's ...

what does the spin sense do on a lg washer The washer needs to be level. If the washer not level it will throw the sensor.

...line on the 1st E The tE error or fault code indicates that you have a defective water temperature sensing thermistor. The thermistor cannot be repaired and will have to be

but the washer will not continue to run? That is a door switch error problem. The door latch is not sensing the door closed. You may need to replace the door latch assembly

front loading lg washer on the spin cycle the washer keeps shaking I have leveled and locked the lock washers but it keeps working its way across the ceramic floor. Is it possible its the smooth floor

I'm getting an error code EU. It shut off and was full of water. Hello, the EU error means "Unbalanced load" is sensed three times during a spin operation, and to resolve the issue. 1. Open lid and Re

lg washer water sense not wotking The solution was given earlier but please check for spares in the link: Pressure switch

LG Front Load Washer I constantly get a tE error code when the machine is sensing the load of wash. I unplug the machine, rearrange the clothes in the machine and try it again. Usually that does the ...

Drain error This washer measures the amount of water. The control keeps up with that. If that control senses it is taking too long to drain, then it declare an error, and shut down to prevent flooding