LG WM-2277HW Front Load Washer "replacing bearing assembly" Questions

...assembly). It is essential that this surface be perfect as it keeps water out of the bearing behind it. The seal can be reused if it still fits fairly tightly on the shaft and that it was not damaged ...

...Bearing replacement is quite a big job. The components can be replaced individually, or the rear drum assembly can be replaced as a whole. Obviously there is a difference in time involved and ...

I have an LG WM2688HWM front loading clothes washer that makes a grinding sound when the drum is turning. Everything else is OK except for the grinding sound which most likely means that the bearings ...

bearing fail. I have the drum out & seperated but I cannot get bearings out or inner drum out. what is best method for getting bearings out? is there a special puller or can I bang them out? Order

HOW DO I REMOVE THE BEARINGS OF THE REAR OF THE DRUM FROM A LG FRONT LOADER You can't since these bearings are pressed in at the factory and are not serviceable. You would need to replace the tub's ...

...bearing problem and it will need to be looked at by a qualified LG technician. That is a big job and will require total disassembly of the tub and drum assembly to get to the bearings. There are 2 of ...

bearing at the rear of the outer tub assembly. I'm very handy and for the life of me couldn't figure how to remove the existing bearings to change them and the seal (I only knew there was a seal cause

assembly and the sealed bearings which appeared to pressed onto the spider are showing. I couldn't figure out without taking the entire machine apart how to remove the bearings to replace them and the

...drum can be moved up and down, you have a severe bearing problem that will require a technician to tear down the unit and replace the bearing and drum assembly. It's a very expensive job. Good ...

...assembly as part of the tear down process to access the bearing. Since you did not mention any fault codes, there is a grinding sound AND you have to index the drum to get it to start, the magnet may ...