Dryer / drying troubles - DIY repairs WD-12320RD / WM3431H. It was difficult to find suitable solutions so I shall share my experiences here. I live in Malaysia and purchased the LG washer-dryer model
Question about LG WM Washing Machines
...Dryer dries 80% of the time. The Washer leaks, leaves clothes wet and water in the soap dispenser. All of the machines take about 3 hours to get done what my last machines could do in 1 or less, how ...
...loader washer and dryer lg model wm0742hga and the wonderful dryer model dle0442g. These high efficiency items with there magnificent light show and quiet running are only surpassed by the wonderful ...
...LOADER DRYER LG. Make sure the dryer exhaust tube is clear of lint and not kinked. Next thing I would check are the thermal fuse and thermostat. Check this out: ...
Question about Maytag Washing Machines
...noise when drying, especially when clothes are heavy. Does that mean it is about to give out ? Could be the bearing or some of the Rollins needs lub What brand it's you dryer?and is it front
Question about Samsung Washing Machines
...will not work at all. It is a Samsung front loader gas dryer model # Dv316LGS/XAA SOMETHING IN THE BLOWER WHEEL CAUSING A OBSTRUCTION AND MOTOR WILL NOT START. START AT THE TOP THEN FRONT WILL COME ...
Question about LG Washing Machines
Dryer 7 (WD12331AD)
Its is a direct drive front loader with 7kg capacity for washing and 3.5kg capacity for drying.
when new
thats 7 kg with wet clothes and water
and only 3.5 kg wet
Question about GE Washing Machines
clothes and see if the dryer catches the lint. It's really bad on the black clothes, that I don't put in the dryer. But it does it on all the clothes, just can't see it as bad on the lighter colors. A
...dryer (duet pair) anymore. i would refer that question under your owners manual for washablity issues and cleaning the duet front loader also go here for tips ...
loader. If you remove the top cover, you will find 2 circular like black discs (the size of a dime) on the right hand side about 6 inches from the front. You need to push those down (with a very small
2,568 questions posted
Usually answered in minutes!
401 Questions
243 Questions
245 Questions
234 Questions
195 Questions