LG WM-2277HW Front Load Washer "little plastic pieces hold drawers" Questions

plastic out, hold panel in place and remove that bottom screw from step 4. 11.Lift front panel about two inches, swing the entire front panel to the right and set against something - You should now be

...plastic pretty hard and reasonably high. That is because the first set of holes have a little deflector on them directing the spray to the front (I guess to make sure the soap tray is rinsed out). I ...

...little tray, then find a solution that works and post a follow up here (I imagine it will involve a bench grinder :) ) HAPPY WASHING AND BUY AMERICAN!!! Hi, After you have the drawer freed up, take ...

...little plastic cup its cloged up remove and clean out.put back same way...You just saved 200 dollars....Your welcome Catriver's photo excellent. Front panel removal impossible for us w/o hassle ...

...plastic. Now you can finish putting the drain trap cover back on, remove the clamp and restore the bottom front panel. Spinning like a Top again, and all thx to you, you saved me two weeks without my ...

...plastic crossbar by reaching behind and squeezing 2, one on each side, clamps together to get out of way. (can get to parts much easier by doing this) also disconnect (3) rubber boots from bottom of ...

...plastic out, hold panel in place and remove that bottom screw from step 4. Lift front panel about two inches, swing the entire front panel to the right and set against something - You should now be ...

...plastic cylindrical piece 2-3" in diameter with a screw cap, remove the cap and clean the filter. You may want to have some towels handy as the water gushed when I took mine off. Also, be sure to ...

...little thing caused it, and b) the simplicity of it (did it in 1/2 hour) when I thought this was going to be a all night job with 1000 parts across the floor.How its done:Remove the power and water ...