LG WM3431 Front Load Washer / Dryer "condensation" Questions

LG WM3431H during dry cycle condensation builds on inside of machine and then underneath, cleaned all lint out already Have cleaned out condenser, bellow and inlet duct of lint. Detergent drawer has a

My LG WM3431H All-In-One Washer and Dryer won't dry Hi, My LG WM3431H All-In-One Washer and Dryer, which I have had for a little over a year, has stopped drying the clothes. It goes through the whole ...

drying is it okay to turn off the water during the dryer cycle, or is it necessary to leave it running? You need to keep at least the cold water turned on because it uses it for the drying operation. ...

I have a lg wm3431 and it does not dry i get and error code of dhe every 10 minutes is it expensive to fix? The dryer heater is not working. You will need a technician to diagnose this problem. It is ...

drain hose how to replace the drain line does the front come off This hose can be removed from the rear by removing the access panel. Look to the left and you will see the drain coming down from the ...

Why does a LG washer just keep filling up with water till drum gets full and leaks out door I thought they were not suppose to do that ? Defective water level sensor. If you have water damage,call ...

red light on,check filter Is this a ventless dryer? I.e. a condensing dryer? If so, there is a filter that filters the lint out of the water in the condensing unit. Check your owner's manual to find ...

My 3431 dryer takes too long to dry and it vibrates badly during the spin cycle. You have two issues. The cycle time on this unui in the normal mode is 3+ hours. If it is longer than this you have a ...

I have a LG wm3988hwa and it pumps cold water into the drum while spinning /drying , the only vay i can have it finish the drying cicle is close completly the water as soon as the last spinning cicle ...

...after washing to dry out and wipe it down with a towel. Then we shut the door and it ends up with condensation on it. Anyone else have trouble with either of these issues and know if there is a fix ...