...door switch, still won't run, if you push the button to turn on the light comes on but as soon as you release the button the light goes out and nothing happens you have the wires reversed on the door ...
...runs continuously As soon as the shut the dryer door, the drum runs continously. It will not stop unless the door is open. If it is not programmed to run, the dryer will not heat up, but it will run. ...
Question about Kenmore Dryers
door and can hear the switch engage, but it releases as soon as the pressure is released. Front loading dryer, Model no. 110.66924500 Dryer would not run, replaced door switch and it ran great for two
...door open,as soon as i close the door or press the door switch it syops. The door safety switch has come loose or become misaligned. A little study will reveal how the switch works, & most likely why ...
...soon as close door press start unit clicks but wont run. If i click start button again it then beeps 3 times.. anyone have solution to this particular problem. Many different possibilities. Could be ...
...button is pressed, but as soon as it is released it stops. Can you help? check the door safety switch, you can bypass it by jumping the 2 wires together, if it runs then just replace the door ...
...runs fine but as soon as i let go it shuts off anyone know what this might be? Without the make and model number of the dryer, this is pretty hard to diagnose. It could be relays, the main motor, or ...
...door problem but if I hold the select button down on the temperature selection it will run but as soon as i let go it reads the dr code again. I cant stand there and hold button for an hour while ...
soon as I let go it quits - replaced switch at door but no luck Motor has a "Run" winding centrifugal switch that may need to be replaced. Start button energizes the starter winding but when the "run"
328 questions posted
Usually answered in minutes!
287 Questions
228 Questions
185 Questions
133 Questions
111 Questions