...top off. Some models that don't have the consol on top you can just take the 2 screws off the back that go to the top and after the top is removed it is held in with 3 5/16ths screws. Another model ...
...top off. To do this you locate the seam that runs just below the top, remove any screws on the back that hold the top and bottom together and then you pry the top off. You should not use a pry bay ...
...under the rim of the top and pry the top off. The putty knife helps release several spring fasteners at the top of the cabinet sides and front. Good Luck and please rate 4 thumbs for the free ...
...6. with the top dogs off you should be able to lift the top, like the hood of your car 7. once the top is up , you will have access to the tumbler top and the screws for the fins should be right on ...
...top off Use a putty knife between the top and front about 3 inches in from either side as you pull up on the top. Taking the front loose to remove from dryer. There are 2 screws inside at each edge ...
How do you get the top off a kenmore dryer I can't get the to top off my Kenmore dryer remove screws in back, slide top back about four inches, left off.
how do you take the top cover off? ON the rear of the top, there should be 2 screws, remove them and slide the top back about 1/2 " and lift the top off.
...take the back off to get into it. Usually the top will be clipped on and if you put a screw driver into the groove running around the top and inch or two below the top corner it will pop right
top off my dryer to retrieve something that is down by the drumm . The back is already off for cleaning. if it has lint filter on top, remove 2 screws in filter housing , pull top forward and lift. if
...off and unhook wire on door switch on top of door. Look under drum and see how belt go on pulley so when you go to put it back on you will know how to. Take belt off pulley and drum and pick up on ...
77 questions posted
Usually answered in minutes!
287 Questions
241 Questions
228 Questions
185 Questions
133 Questions
