LG DLG5988 Gas Dryer "check filter wont reset" Questions

...check filter light is flashing. lint filter is clean. all lint has been vacuumed out of the lint filter cavity. still no luck Wrong Richard-sorry- but had this issue. Check filter light would come on ...

filter light flashing take off the back panel and try to reset the fuses in the cabinet also make sure to check the switch near the belt tension pully make sure that is is pushed to the right so it is

...check filter light on. Flter clean dryer sounds like it wants to start but doesn't. Is there a reset button? Hi, There can be many reasons why your dryer will not turn... This tip that I wrote will ...

...outage. Reset breakers and checked door latch, lint filter to no avail. Any help, please? Blown fuse inside dryer? this may or may not help: ...

...wont start the machine is activating it will let me do everything except switch on i have cleaned all filters and checked all connections and tryed reset button hoping there is a quick fix without ...

...check filter light is on what should i do Turn breaker off. Then try again, this might reset controller. Try drying on a timed dry and see if that works. Might have to take apart and give it a good ...

...filter fits into. The thermal fuse is white in color and oval shaped with 2 blue wires to it. IF bad it must be replaced since it is not resettable. To check it DISCONNECT POWER TO DRYER remove wires ...

Check the reset button (usually around the back) not always obvious. If it has overheated at some stage it will need a firm push in this should get it going again. If the problem persists it will be a

...check the hi-temp cut out at the back...if you haven`t already. It will look like this... If you push this to reset and the unit works, great. I would keep an eye on it though since the hi-limit ...

...check lint filter light come on checked out the area and below the filer was full of lint. Vacummed it all out put the thing back together but it still wont heat. Is there a reset or should I be ...