Select Jazzy Used Electric Wheelchair "chair controller faults" Questions

...follow this procedure : A . Switch off the control system. B . Make sure that all connectors on the chair and the control system are connected securely . Make sure brake release levers are in the ...

controller flash and no power goees to the chair. Have checked all connections and still nothing works. Flashing lights indicates a fault. Here' the users manual which contains the fault codes for the

...chair code 3101 bridge voltage fault? The fix for this fault is to replace the chip in the VSI controller. This happens when you consistently drive the power chair with weak or low voltage

Chair stalled suddenly at full charge. Charge lights blink rapidly back and forth. What should I do? This could be a few things. 1. get the batteries checked, they may say you have a full charge, but ...

controller fault. Sometimes it will also mean you have one or both motors disengaged. If the charger is not plugged in when you have this fault then try and push the chair. If it moves freely then you

chair. A technician will have a hand held programmer to read all the faults stored in the VSI controller log. This will give you an overall picture of the condition of all the electrical components of

...chair purshased from scotter store. error code flashes 8 times. cant get anyone to come look at it what do i do? If you have a GC Controller 8 flashes indicate a control system fault. Check all ...

...controller checks that you have a good signal from the brake and will not move if it doesn't get one disengaging the brake will not remove the fault and the chair will not move. If Medicare paid for ...

...chair. If you happen to have the older Mark IV controller (has a toggle switch to turn on/off and three battery lights), the 5 flash code means the chair is receiving high or low voltage from the ...

controller fault. Check and see if the right motor has been disengaged. The easiest way to chreck this is to try and push on the right side of the chair. if the wheel begins to turn then the motor has