cubed ice that solenoid should pull up the metal rod on the ice bucket so full cubes will come out. First check to make sure the metal rod on the ice bucket isn't somehow caught under the solenoid and
Question about Frigidaire Refrigerators
...cubed ice to come back even after holding in the reset button and holding in the cube ice button - only crushed. Any ideas? Thaks! First pull out the ice bucket and close the door. Set for cubed ice. ...
...down, then ice cube production should be on. The problem may be either a faulty solenoid valve (mentioned above), switch in the ice maker assembly - the detection arm in particular or wiring
Question about Frigidaire Refrigerators
...door does not dispense water. Ice Cube maker continues to make ice cubes Water dispensing solenoid is bad. You need to replace the solenoid valve. This typically is independent of the ice
...ice THE SOLENOID IN THE ON THE ICE MAKER MOTOR IS NOT WORKING IT HAS ICE BUILD UP ON IT OR IT HAS A SHORT IT PULLS THE PLUNGER THAT OPENS THE FLAP THAT LET ICE CUBES FALL OUT. REMOVE ICE MAKER AND ...
...ice bin . Press the door switch in , and press the dispensor actuator pad . In the back , on the panel with the prongs , there is a square box cut-out , which houses a white square plastic piece . If ...
ice is selected You have a solenoid switch which switches the dispenser back and forth from crushed to cube. It could be stuck or not working or the parts connecting it could be disconnected or broken
...that raises and lowers the arm on the ice bin giving you crushed or cubed ice. Check to see if that solenoid is froze up or if your rod got stuck under it. If all check ok then replace that
Question about Refrigerators
...ice cubes You have a solenoid switch which switches the dispenser back and forth from crushed to cube. It could be stuck or not working or the parts connecting it could be disconnected or broken. You ...
Question about Frigidaire Refrigerators
...ice. The green LED indicators illuminate properly for cube and crushed. The dispenser mechanism that selects cube / crushed seems to be hung-up You have a solenoid switch which switches the dispenser ...
187 questions posted
Usually answered in minutes!
418 Questions
375 Questions
204 Questions
158 Questions
111 Questions