LG LRBN20510WW Bottom Freezer Refrigerator "program new control board" Questions

...NEW board. it is a microprocessor. like a password. We've found that certain codes are unique to certain control board. Only certain codes will program with certain board part numbers. If the code ...

...new control board. Improper programming: Make sure that you are properly programming the control board with the correct code. Follow the manufacturer's instructions carefully and ensure that you are ...

Control board is programmed unplug fridge to reset board if programming is required you have to remove front display cover and remove board there's a plugin on front of board programming tool required

...new jazz board the wrong one? Old part had sticker on chip inside that reads "JAZZ 09". New board has chip inside with sticker that reads "JAZZ 14". I'm now into month 2 of this probem--HELP! thats ...

...from cover 7) install new boards 8) reinstall connection and reinstall cover and light cover 9)program control (instruction should come with new control) Let me know if you need more help... ...

...Program CODE the control will not save the new code, but will beep. (The unit will NOT run with a Program CODE of 0000).
Once the Program CODE has been saved the Programming Mode is exited by ...

...program Has new control board,new high voltage board and a new touch pad. Followed the instructon sheet for the high voltage board and it will not program. if connected right have the parts person ...

...program the code number ftom the mod/ser# tag on to the new board. it wont work till programed The programming "how to" info is usually included with the new board. Your refrigerator operating code ...

program the new board. Programming Mode:

NOTE: The Program Code is located on the Serial Plate on this unit after the word Code.

1. Press and hold the Door Alarm Keypad .

2. Press

...control. Programming instructions are usually included with the new part, the new part will not work unless it's properly programmed to the correct fridge via the "Code" number located on the ...