Jacuzzi RapidHeat In-Line Heater U395000 [ Bathtubs and Whirlpools, "tub motor turns jets" Questions


Question about Neptune Home

1 Answer

...working I have a Neptune jet tub. The motor turns on when I press on but there is NO air coming from the jets. What do I do? Check your breaker in the breaker box. Is this an air tub or a water


Question about Jacuzzi Home

1 Answer

...tub,turn it on.pump comes on and pushes water out of jets for few seconds and then shuts off.Also pump is very loud the motor protection device is sensing to many amps. could be a flow restriction or ...


...motor. I filled the tub, inserted a slotted regular screwdriver and turned it about 10 times clockwise, then 10 times counterclockwise. You should see the whole motor turn. Doing this loosened it up, ...

...motor that will shut if down so as to not damage the windings and such. once your tub has cooled down for 10 mins or so it will turn back on. the fact that you can push the button multiple times just ...

...tub with house purchase. Motor seems to work, but no air out of jets. My contractor found that if all jets but one turned off, air will eventually start coming and then other jets can be turned on. ...

Question about Whirlpool Home

1 Answer

...motor, some have touch sensitive trim. There may be some sort of medallion from the maker on the tub, simply touching it will start the tub. Once you get it going most tubs have a built in timer that ...

motor down and I let the tub turned off for a bit the jets will spray when I turn it back on, but only for a few seconds. What would cause the jets not to spray when it appears the motor and propellor

Question about Maax Home

2 Answers

...puts air pressure from the push button to the electric motor switch. It was pulled off on my Maax tub . Just push the hose back on both ends. Push button on upper end and motor switch on pump

Question about Home

1 Answer

...tub and turn on the pump/motor (not sure), you hear the motor/pump running but no jet bubbles coming out the ports. It is only when you slosh the water back and forth against the inlet port does it ...

...motor for the tub. Also by code the motors have to be accessable, so there should be a door that opens up to expose the motor for servicing. You may find the GFCIs there, if so, check that they are ...

Not finding what you are looking for?
Jacuzzi RapidHeat In-Line Heater U395000 [ Bathtubs and Whirlpools, Logo

72 questions posted

Ask a Question

Usually answered in minutes!

Top Jacuzzi Home Experts


Level 3 Expert

4369 Answers

john h

Level 3 Expert

23424 Answers

Bill Johnson

Level 2 Expert

306 Answers

Are you a Jacuzzi Home Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides