Jacuzzi RapidHeat In-Line Heater U395000 [ Bathtubs and Whirlpools, "install tub" Questions

installation of our whirlpool tub we're having problems with installation of our eljer whirlpool tub. is the sheet rock supposed to go in back of the lip of the tub? this is an ''alcove'' installation

I bought a model 2221 peanut soaker tub installation I bought a model 2221 peanut soaker tub. It sits 1 1/2'' off the platform. I need the best way to support the bottom so we can actually use the tub

...and to meet code. I believe that the female plug is for an optional, in-line heater that can be installed into the tub unit. You should be able to check the installation manual that came with the ...

...tub MAXX FT6030 and the manual says to install wood stud at 19 in but when i measure the bottom of the tub lip when at level it it at 21.75 approximately. What is the purpose of the stud if it won't ...

tub I am about to install...I have questions about how to seal the rim to the tile suround??? If it is a five foot tub, home depot usually carries them, if not any plumbing supply store will have them

...tub. Thanks When you installed the new jet, did you install a new gasket on the wall fitting or use 100% RTF type silicone? In order to seal a wall fitting that is cracked an leaking, the replacement ...

...jet Whirlpool tub We purchased a Maax 10 jet Whirlpool tub with a texturized bottom. In order to be installed, we had to disassemble the pump. Now, the tub is in, but we do not have a diagram to put ...

...tub, install the air tubing from the nipple on the underside of the air button to the nipple on the box that plugs into an outlet under the tub. The pump plugs into that same box and the air tubing ...

Install of AS 2425 whirlpool tub How to mark level line on studs when there is no access whatsoever? (tub is closed on 3 sides with the exception of the small access panel in the apron) Once that is ...

when filled with water, the tub edges pull away from the tile, installed per manufacture's direction, is this normal? No, it's not normal. I suspect you missed one of the early steps in the ...