Makita 10" Miter Saw LS1030N "replacing spring circular" Questions

...spring on my makita 5007F circular saw? i put it on but it keeps falling off. what step am i missing? is the spring stretched?? there are 2 holes one in the lower guard and one in the upper guard ...

how to replace a makita circular saw guard Simple, unpug tool. Remove blade and back flange. Remove circlip and lift off guard. Unclip spring. Re-fit new guard. Refit spring and circlip. Refit blade.

Makita circular saw 5007n, it will only run when it is held upside down or sideways. I replaced the switch and that did not solve it. The brushes are good, brush springs good. What is going on? Great!

...circular saw sparks coming from motor motor stops and will not start Bad brushes or bad armature. The armature should have a nice wear pattern exactly the size of the brush all the way around it. If ...

how to replace a guard spring on a model 367 skilsaw take blade off and under blade there is a giude around shaft area around housing where sping goes i hope this was helpful

...circular saw. Most parts for this tool, including the lower blade guard and spring are available online for about $20 or so (less shipping) from a variety of online tool replacement part providers. ...

replace the spring which spring??? If it is the one that pushes the head up it is somewhat difficult and can be done but you would need a press

replace spring for saw guard makita ls 1030 Remove the guard and holder assy and place it on a flat surface as you undo the screw you will see how the spring fits into the holder under the bracket and

How do I replace the blade guard on a Dewalt DC390K saw Remove the clip behind the back blade flange holding it on to the housing and lift it up of the return spring, replace the opposite way ...

the guard has stopped returning to the safe position. it rotates all way forward until it stops on the saw frame. I do not see a spring or anything to replace or adjust. any suggestions ? ...