Makita 10" Miter Saw LS1030N "blade guard spring replacement" Questions

Ad

Question about Milwaukee Saws

1 Answer

...blade guard spring I'm replacing the spring that brings the blade guard back in place when you're done sawing ... can't seem to figure out where the spring is supposed to lie within the saw. Any help ...

Ad

how to replace a makita circular saw guard Simple, unpug tool. Remove blade and back flange. Remove circlip and lift off guard. Unclip spring. Re-fit new guard. Refit spring and circlip. Refit blade.

Ad

lug/tab on the back of the lower blade guard and also a hole or screw point on the upper inside of the main/fixed guard. The spring should have a hook at either end that will go on these fixing points

guard? if so you don;t have to remove it to change the blade, give me the exact model number or you can go to makitatools.com and download a breakdown that shows the reassembly of the guard, it is not

blade if you haven't done so already. Then remove the bumper (rubber piece) that stops the guard from returning too far. Next you will need a pick or a small flat head screwdriver. Look around the hub

...blade guard on a Dewalt DC390K saw Remove the clip behind the back blade flange holding it on to the housing and lift it up of the return spring, replace the opposite way remembering to relocate the ...

how to replace a guard spring on a model 367 skilsaw take blade off and under blade there is a giude around shaft area around housing where sping goes i hope this was helpful

...blade guard and spring are available online for about $20 or so (less shipping) from a variety of online tool replacement part providers. Some companies to consider looking at are Toolparts Direct, ...

Question about Makita Saws

2 Answers

...blade i took it apart and can't replace the spring on the cover guard. my husband had trouble replacing the spring that goes in the plastic safety cover....he just eliminated the spring and it works ...

Question about Skil Saws

1 Answer

...the spring on the retractable blade guard on a model 77 worm drive skilsaw? Bearings maybe......I'd also check the armature fan and see if it came loose. Either way it doesn't sound

Not finding what you are looking for?
Makita 10" Miter Saw LS1030N Logo

124 questions posted

Ask a Question

Usually answered in minutes!

Top Makita Saws Experts

Brad Brown

Level 3 Expert

19187 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

john h

Level 3 Expert

29494 Answers

Are you a Makita Saw Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...