depth of cut lever very tight. depth of cut lever assembly very tight on my 12 year old mag 77. seems to be out of adjustment. i don't know how to loosen the big nut on the outside end of assembly, ...
...hand side as you operate it. Push the lever down to release the tension. By pulling / pushing the handle and silver base you can find desired depth. Pull black lever up to lock. Should be good to
...depth lever will not tighten. How can I adjust it? on the lever there is a circlip that you remove and remove the lever, tighten the hex nut with the lever until it holds in place and reassemble in ...
...lever on the right, Unbolt 6 central bolts using tool provided, Unbolt End 2 bolts, and remove blade. To reset, Mount new blade, Bolt in 2 end bolts. Use magnetic setting tools to set depth, and ...
not lock the blade from going dow more. the saw is a 7and one quter inch saw about 2 years old. With the Blade depth adjustment lever all the way down pull out on it. you can move it up and push it in
lever to lock the cutting depth? If so, it's held in place by a lock plate that you remove by taking out the small pan head screw next to the nut. After you take the lock plate off the
Question about Saws
...depth locking lever will not tighten even when all the wsy dn. Can it be adjusted? Take a look at the hinged part of the locking lever, usually there is a nut and bolt, looses the nut, open the lock ...
54 questions posted
Usually answered in minutes!
103 Questions
45 Questions
32 Questions
30 Questions