Karcher K2.26 Electric Power Washer "pressure motor cuts" Questions

pressure The motor runs and cuts out as it sould befor the trigger is pulled, but when the trigger is pulled there is flow but no pressure the motor cuts in ok, i have checked the inlet filter, please

the motor working harder and overheating. It could also be the pressure valve sticking or the spring inside has broken and doesn't allow pressure to build so the motor runs faster and then overheats..

...pressure washer motor runs for a short while then overheats and cuts out, machine has been stood for a couple of years, have freed everthing off and no apparent cause for motor over heati motor ...

...Pressure Washer, motor constantly and rapidly cuts on and off, as pressure builds and wanes away alternately even as the trigger is held down constantly. There are several possible causes of this ...

...motor cut out and won't restart Karcher K2.36 Pressure Washer I've just fired up my Karcher for the first time since last year and the motor started running fine, I then switched on the tap to allow ...

...motor. Without knowling the make of your pressure washer, I cannot help with the location of the switch, but I would expect you to find it close to the pump outlet, probaby in the pump casting. A ...

karcher 432m pressure washer cuts out after 3 minutes then starts up again after a minute and so on.... Could be your motor overloading. I would first try a new motor capacitor.

pressure should cut off the motor, but as it also cuts off the water flow at the wand end and the motor spins a few more revs until it stops, then there is a huge pressure glitch which blows apart the

...issue or an internal check valve issue The pressure switch that shuts off the motor when you release the trigger may need to be replaced if you're sure that there is sufficient operating

Pressure washer keeps cutting out HI Earl I need a little more info do you mean the motor stops or the pump stops pumping ( with the motor running)???