Poulan/Weed Eater No. Te475 952711797 17" Le Gas Trimmer/Edger "coil" Questions

why do i have a very weak spark at the spark plug? If the ignition coil is not generating a strong spark, you replace it. Often the insulation on internal windings of ignition coil will come off and ...

CHECK COIL ON WEEDEATER HOW TO TEST THE COIL Most likely the isue is too large plug gap. The proper gap is 1mm, set the gap first then if you still want to check coil output take the plug out hold the

how to repair solid state ignition on a toro weedeater if u can get to coil replace with new one leave screws loose move coil away from flywheel snug screws rotate flywheel so magnet is evenly under ...

yard machine weed trimmer will not recoil. I pulled the cord and it would not retract check this link out it will show you http://www.youtube.com/watch?v=CTCEJ3hTSOQ What model of Yard Machines are we

i crank and get no spark from coil wire brush contact points does the coil haved to be back so far gaped its 7 horse brigs The coil should be as close as possible to the flywheel without actually ...

test ignition coil honda gx25 i have tested coil with a multimeter and tested also my honda whippersnipper which has the same engine and both coils tested the same but i have no spark on my edger, the

Line trimmer does not appear to have spark. How do you test a coil wire? you can connect a new spark plug to the spark plug wire and ground the spark end to the motor you should see a spark if not ...

how to replace coil on stihl fs85 weed trimmer Remove the starter & cylinder cover and look for the coil mounted next to the flywheel. Remove the 2 screws holding it to the cylinder and cafefully ...

how to check ignition coil with ohm meter The only way I know how to test a coil is to take the small wire that hooks into the tab on the coil off and then use a spark tester, this way you isolate the

how to replace ignition coil on asthil 029 what is the clearence Coil should be held on the saw with 2 torx t27 size screws. These will resemble a star. Remove the 2 screws, lift out the coil. The ...