...gas trimmer mo.no. 316.711970 Not much info in the question. You may have organic matter wrapped tightly between the spool housing and the shaft. To fix, removed the spool housing to acess the
How do u get the end off to replace the string? Hold the big hub tight and unscrew the small hub underside.if its to tight use a grips or something similar
#160;pull the cord through the hole on the casing wind the spring back on the strimmer not to tight but tight enough for the cord to return once pulled. Attach the cord onto the spring this
How do I remove the head for repair. The line spool is off but I can't get the head off Cover the threaded end of the driveshaft with a rag and grasp it firmly with a pair of pliars; holding it ...
Question about Husqvarna Garden
...other spring is fine. The plastic Drivers are holding the spring in its spot. I've tried the bolt tight and lose. Check binding of the pulley on it post, that washer is not biding the pulley. Too ...
Question about Garden
...If it is clogged the primer will not work. On some of the Walbros and Zamas they use an extra tight filter screen that clogs very easily when you have bad fuel lines. These extra tight filter ...
I changed the blade on my Toro Edger attachment but the left handed thread on the nut doesn't get tight. Is it supposed to or is it some special design that doesn't allow it to be overtightened? Does ...
...Pull the loop out with the starter handle and try starter. If the starter handle does not come up tight to housing reclaim the loop with needle nose and give the pulley one or two more winds and
...rebuild kit. Remove the gas lines (after draining gas). Remove the carb and inspect the screws and tightness of the screws in the 2 end covers. Are the screws tight? If not tighten them up and ...
920 questions posted
Usually answered in minutes!
Step 2: Please assign your manual to a product: