Question about Garden
...carburetor screws are supposed to be set at on weed eater model gti15 One is the low speed or idle adjustment the other is the high speed. The settings are based on how the engine runs. There really ...
they're the model # of your carburetor) and enter them into the Cross-Reference Page on PartsBuggy.com's website. If there is a kit available for the carburetor, you'll find it there
Setting carburetor Depends on the make and model of the machine
...Model 091212-1319-E1 that will not start. I rebuild the carb but it still will not start. If spray hot start it will run for a few seconds Sounds like you will need to re-clean your carburetor and ...
...model ut21546a? look on the carburetor. there will be 2 screws right beside eachother. one is an idle jet and the other is the main jet. if you want faster or slower idle speeds, adjust idle jet. if ...
...settings on page 26 & 27 of the Stihl FS 45 manual. http://www.mccoyslawn.com/parts-manuals/Stihl/FS45_46_Manual.pdf My 'painful' experience of a Zama C1M carburetor on my Stihl SH86 leaf blower ...
...carburetor and remove the jet screws, count the number of turns it takes to seat the jets from their original position. That way when you go to put the jets back in, you know how many turns they were ...
Question about Ryobi Garden
...carburetor on ryobi gas weed eater depends if u have the export only carb , because if you have the C.A.R.B. model it's not adjustable (other than idle) , if you have the export only version then ...
...IT THE SAME THING HAPPENED BUT THIS TIME IT NEVER DID RUN. IT IS A TROY BILT MODEL. either the carburetor is dirty, not set right or the control lever inside that lets the fuel in isn't set
...edger model # UT50500/UT50901 Hi pqtallbroad... It sounds like you have dirt/debris in your caburetor jets,fuel passages or a diaphgram that is becoming non-flexible. Check/Clean/Replace your Air ...
920 questions posted
Usually answered in minutes!
175 Questions
129 Questions
92 Questions
66 Questions
77 Questions