Taylor 7532 Ultra Thin Glass Digital Scale "remove battery cover scale" Questions

screws holding the LCD display. 3) Once the display is loose, turn the display over to expose the battery cover. 4) Unscrew three Phillips screws holding the battery cover. 5) Remove the battery (2032

...BATHROOM SCALE MODEL ZB13 HOW TO CHANGE BATTERY On the back of the scales under the Ozeri sticker, you will find the battery cover. Remove the cover and replace the two CR2032 batteries (model

...Remove the battery from the compartment. Close the battery compartment door. - Sit the scale right side up on a hard surface floor. - Step on the scale and stand still on it for five to ten seconds. ...

...Remove them, open slowly the top cover and inside reside the battery, pop it up gently with the flat screw driver. 6) Replace the battery, reinstall the 3 screws. 7) Where the display stand, remove ...

...remove, use a small screwdriver to gently pry up on the battery or simply after opening battery door invert the scale and shake. In the event that the scale battery needs to be replaced, (display ...

...on the bottom of the scale. 3. Remove the old battery from the compartment. 4. Place the new battery with the "+" sign up into the battery compartment. 5. Replace the battery compartment

How do I insert batteries into scale Battery compartment is usually on the underside, and you may need to remove a cover secured by one or more screws.

...battery, but still got the same message. My wife noticed that one of the feet on the bottom of the scale was loose. The feet are twisted on to the scale and held by two small flanges. When I gently ...

...battery compartment. Remove screws replace battery reassemble in reverse of Instructions.
If the battery is corroded (as mine was)it has discharged ruining the circuit board and is a hunk of ...

...the LCD (without removing the cover) and thus the scale will often have to be returned to the manufacturer for repair. Contact them at 1-800-326-6247 for the Conair appliance customer service