Jandy Aqualink - Rs24 One Touch Pool / Spa Combination Control System "diverter valve" Questions

Ad

...diverter valve for above ground how to setup a diverter valve on a solar filter for above ground pool? If you want all your water going thru the solar heater before re-entering the pool, you'll need ...

Ad

Question about Pool & Spa

1 Answer

...Depending on the valves in use they are not overly difficult to change the diverter settings. If you need help with that please comment to this post and include the valve brand and model number. ...

Ad

Question about Jandy Pool & Spa

1 Answer

my spa drained into my pool ONE OF THE DIVERTED VALVE IS STOCK OPEN TO THE SPA OR SOME ONE MOVE THE TOOOGLE SWITCH

Gas is on, all burners are lit, pump is running, diverter valves are set to spa, no warm water, minimax 200, please help Just purchased house and have no idea how long heater sat without being used. ...

Question about Hayward Pool & Spa

2 Answers

...diverter is stuck open or if it is over worn, also you could have a broken spring on the unit. The other thing would be the thermal control valve could be stuck open this is also inside the header. I ...

Question about Dream Maker Spas Pool & Spa

1 Answer

...diverter valve and let circulate through other jets. when I came back out to shut spa down there wasn't any water flow and motor was still running. so I shut down system and drained tub . took pump ...

...diverter return valve is not working or is off I found the same issue with mine, it was the chlorine auto feeder. the system "picked up" water before the filter and dropped it back in the system ...

where is the pvc valve located on a ford exployer 4.0 liter engine. the pcv valve is located between the intake manifold and the firewall on the drivers side, you may have to remove the throttle body ...

Question about Pentair Pool & Spa

2 Answers

I have a Pentair SunTouch Controller operating a Pentair Intelliflo VS pump. The controller is stuck in the Service Mode. How do I get it out of this Mode? I would call the Pentair technical support ...

Question about Pentair Pool & Spa

1 Answer

minimax 100 runs for about 5-8 minutes and then shut off. Won't come back on for about a hour Check your water flow. If you have an external by-pass valve it need's to be 80-90% off so water will flow

Not finding what you are looking for?
Jandy Aqualink - Rs24 One Touch Pool / Spa Combination Control System Logo

246 questions posted

Ask a Question

Usually answered in minutes!

Top Jandy Pool & Spa Experts

David Spradling
David Spradling

Level 3 Expert

13520 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Are you a Jandy Pool and Spa Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...