...Any Ideas on reseting the inside panel? Check the inside and outside low voltage wiring connecting the control panel. Take inside panel to the outside panel and hook up. You might have a bad
Question about Jandy Pool & Spa
...it can some one help me? Check the wiring. If you have nothing inside the house take the controller outside and hook it up at the outside ...
...control box outside or power center control board itself? Pull the cover off the control panel. You will probably find a button which would be accessible from outside the panel with a paper clip or ...
Question about Jandy Pool & Spa
...4 wires are connected inside the controller (your inside wall unit) and also at the power center outside. After removing the cover outside you will see a red 4 terminal strip (4 wires) above the ...
Question about Jandy Pool & Spa
No lights on either the inside or outside Jandy AquaLink RS4 box I have a "Jandy AquaLink RS4" this is not working. I do have full 220 volts going to my outside box, but no lights are on either the ...
we have compool lx3400. have no connection between house and outside panel . We have to go out to the box outside and manually turn off and on If there is no wall mounted controller (CP-3400) it ...
No controls The pool is stuck in maintenence mode. None of the control panel button do anything. Is this locked out?? Outside control panel is in service mode. Put in Auto
...outside control panel. It started working again for 2 days and is now off again. Com cable seems to be working just fine, as do the controls outside. when the indoor control start the alarm , did you ...
57 questions posted
Usually answered in minutes!
193 Questions
170 Questions
177 Questions
72 Questions