Hayward Pro Series 18" Above Ground Pool Sand Filter System with Pump "pool sand filter troubleshooting" Questions

...sand in a sw256t swimpro filter, the pressure is fine for about 2 hrs. then drops off to almost nothing. The pool is dirty and I need some help Try the owners manual for these pool filters. It has ...

...sand filter be when I need to clean secondary leaf screen so I don't have water pouring out of pool? Here is a copy of the users manual for these pool filters. This should help you troubleshoot the ...

...pool check fingers and the are not cracked. Put new sand in it rubber seals look good Try the users manual for these pool filters. They have a pretty comprehensive troubleshooting guide that should ...

pool i also received a old sand filter called a Pacific super-flow model #PE30S with a push-pull 3way valve and I don't know how to set this system up. any suggestions Thank you Tommy D Try consulting

...you can follow. It should help you correct this issue and have your filter working properly to clean your pool in no time at all! ...

pool is weak i have a hayward pro series filter, and i cant get the water shooting out into the pool to be strong. its barely tribbling out, so the water is being moved around correctly. Try the users

sand being returned to the pool after vacumming through filter This could be caused by several things. . After back flushing,did you rinse? Turned pump off, moved selector to rinse, and allowed to run

pool. It almost seems to have too much pressure ot uneven pressure. Our filter is hayward s 180 t Below is a copy of the users manual for these pool filters. It has a troubleshooting guide and several

...sand and debri backed washed into the pool what could i do to resolve this problem Here is a copy of the owners guide for these pool filters. The answers to your problem should be there. Check the ...

...sand filter. http://www.hayward-pool.com/prd/In-Ground-Pool-Manuals_10201_10551_14502_-1___I.htm Your filter has Intermatic timer, and you tried the override lever with no luck... Check if circuit ...