Teledyne Laars Laars Lite 2 Pool Heater 250,000 Btu / Natural Gas  "not heating" Questions

...not heating the pool even though the control lights indicate that the heater is on. It is not heating pool, help. If water is flowing thru the panels/collectors, (look to see if the valves are opened ...

...had no problem heating quickly. What am I doing wrong? Is your spa still not heating? If the problem persists it indicates that your heater element is bad. We have instructions on how to test it ...

...out heat when temperature is below 30. when i put the thermostat in EM Heat it is warmer but still not very hot. Heat pumps need ambient air temperature to get it's heat. Usually you need ...

...not heat up. The motor is running at 15C but will nit heat up to the required 36-38C sounds like the heating element has gone to the next life,.....you can test it with an ohm tester,....MAKE SURE ...

...Heating Modes, the Pump has not turned ON and the Last Water Temperature is not Current. To read the Current Water Temperature, either Change to Standard Heating Mode or turn On the Heating Related ...

...not keep heating. my hayward H series above ground heater. Will start up and heat for 30 seconds and then heat shuts off. Motor still runs. I bypassed the sensor on exchanger by pulling the two wires ...

...not heat up to the 104 degrees. Heater is cycling instead of heating to set level. The heater may be wired just fine. The aqualink uses its water temp sensor to call for heat based on what you've set ...

...heat ??? what do you mean it will not heat? is the heater not coming on? If it's on then it's heating. are you experiencing a problem with the heater? Is there an error? You need to be more

on but its not heating up ..water level was low (3inchs) and i topped it up and kids put to much brominating tablets in spa ..so .I changed filters ..still nothing ? Heater elements failed most likely