Jandy Aqualink Rs4 One Touch Control System Control System "air sensor opened" Questions

...sensor for all three. Air - Water - Solar Air, is normally located near the main automation control box, and it is exposed to the atmosphere. The water, sensor, will normally be put into a plumbing ...

...sensor. Most likely, a flame rolled out the front instead of going up through the top. If it's indoors then chances are the heat exchangers are sooted up. FIX THIS! Have the reason identified, and ...

air sensor opened on Aqualink RS4 On your board out side you have tow conpartments one holds the high voltage (stay out of this one) and one holds the low voltage. In this one you can follow the wires

SENSOR. Does anyone know how to fix this on the Dream Maker Spa B6L series? Not much to go on but try opening the drain valve for a few seconds. If you have an air lock this give you a high temp code.

...sensor if it fails the tub will not function at all. Yes a flow switch will shutdown your hot tub for self preservation. The reason your hot tub is not starting up could be a number of things. The ...

...sensor is opened -- so I assume it has failed (I've replaced sensors on both the air and pool many times in the past. Sigh). But that doesn't explain to me why I can't get the valve to open (or even ...

...air sensor problem. Hopefully the air hose popped off, or has cracked...If not then you will probably neet to replace the air pressure switch. Mine had this problem, removed the blower and manually ...

...air flow sensor the heater uses to confirm the fan is operating is not closing. Check the fan first. Is it turning on and moving air thru the unit and out the vent? If so, open the cabinet and locate ...

air sensor to the blower housing and be sure it and the barbs it slip onto are clear of obstructions. If still nothing, pull the wire from the gas valve and look to see if it is getting the 120 VAC to