...not come on and the pool will not heat up. What can I do? You have to go into the pool heater menu and set a temp higher then the water temp.....it is probably set lower then the current water
...temp is 70 30000 gal pool . Ran 10 hrs went from 81 to only 83 131000 btu unit ! With an outside temp of 70 your probally getting down to the 40's at night wich is to cool to get much heat rise and ...
...into the pool and spa. if you want it to heat from the spa put in spa mode let it get up to temp then put it in pool mode so the overflow will work easier to just leave pool mode on with heater ...
...pool heat; 78 degrees. I will turn the heater on and set the temp to 82. The heater will start up and within a few minutes you will see the display temp reach 82 degress. I'm no expert, but i dont ...
...pool heater Cfh is call for ?? heat. That is Not an error code. As stated earlier, = Call For Heat When water Temperature falls 2° lower then Set Temp, a Heat Demand is triggered, and the heater ...
Question about Pentair Pool & Spa
...pool temp. This switch doesn't control what heats up Pool or spa it just selects the heater on and which thermistat to use Check the temp reading on the heater. It is probably set at 91...heater ...
...pool temp is around 70-80.. However, lately the heater which is on when the the timer kicks in has not been firing up. I dont have an orginal manual for the heater. Does the heater not turn on once ...
Question about Jandy Pool & Spa
...one of the settings is low. the pool or spa temp is sensed at the heater and with the water temp located in the pool lines. so both the control board and the heater are sensing the water
459 questions posted
Usually answered in minutes!
